Technical Information includes replacement guide, precipitation rates, height of spray, PLD charts, friction loss charts, wire data, wire sizing and others.
Hunter design guide is intended to be used when designing and installing small single family residential sprinkler systems. It is set up in an easy-to-follow format with illustrations and charts.
Two-wire decoder technology permits control of large irrigation systems by inserting waterproof decoder modules as needed in a low voltage, direct burial two-wire path.
There are many parts to a typical drip system, but a Micro irrigation system offers users the most value, including better control and water savings
These designs are “typical” layouts, realizing that there will be different field measurements in the real world applications.
Each of these designs has been created using a variety of Hunter products, depending upon the requirement of the field.
These Sports Field Irrigation Designs shows an automatic irrigation system for a baseball field by using I-20, I-25, I-40 Rotor.
These designs are “typical” layouts, realizing that there will be different field measurements in the real world applications.
Each of these designs has been created using Hunter products: I-25, I-40 Rotor depending upon the requirement of the tennis field.
A cricket field consists of a large grassy ground on which the game is played, this is ostensibly an oval though most cricket grounds.
These designs are “typical” layouts, realizing that there will be different field measurements in the real world applications.
Lawn bowls is a sport played on a bowling green which may be flat (for “flat-green bowls”) or uneven (for “crown green bowls”).
The rugby league playing field is the playing surface for the sport of rugby league football and is surfaced exclusively with grass.
These designs has been created using Hunter products: I-20, I-25, I-40 Rotor depending upon the requirement of the field.
Insert the plastic end of the Hunter adjustment wrench into the lifting socket of the rotor and turn 90 degrees. Pulling up the riser will allow access to the nozzle port for installation.
The radius adjustment changes the distance water is going to travel out of the nozzle. Fine tuning coverage in your system can sometimes require adjustments to a rotors radius.
Replacement guide: spray sprinklers and PGJ rotary sprinklers. Receive Hunter quality and Hunter performance with the right substitute for your non-Hunter sprinklers.
This section will show you how to troubleshoot your X-Core controller.
This guide will show you how to troubleshoot your Pro-C irrigation controller.
This guide will show you how to troubleshoot your I-Core irrigation controller.
DUAL is Hunter’s innovative two-wire plug-in for the I-Core controller. The DUAL system can operate up to 48 zones via a single pair of wires, at distances up to 2.3 km.
This guide will show you problems, causes and solutions for your Node irrigation controller
The Mini-Clik rain sensor provides the simplest, most effective way to prevent sprinklers from running during rainfall. The Mini-Clik stops scheduled irrigation when it’s rain.
When a system requires the use of a booster pump or pulls water directly from a creek or pond, Pump Start Relay (PSR) that can be counted on to activate the pump each and every time.